What are the signs of a bad clutch master cylinder?

Clutch master cylinder bad symptoms:1, the car clutch master cylinder slight oil leakage, gear when ringing teeth, 2, oil leakage leakage of serious direct hanging
Not on the gear, the car parked on the road can not move, can only go to the repair shop repair; 3, popping up, oil leakage leakage, may be the total pump, sub-pump
Pipeline leakage phenomenon.

If the clutch master cylinder is damaged, it will cause the driver to step on the clutch pedal after the clutch can not be disengaged, after this situation should be immediately repaired.
This should be repaired immediately. The clutch belongs to the transmission system of the automobile, the clutch is installed between the engine and the transmission, the clutch can disconnect or connect the engine and the transmission.
The clutch is installed between the engine and the gearbox, and can either disconnect or connect the engine to the gearbox. The pressure plate of the clutch is fixed on the engine flywheel, and between the pressure plate and the flywheel is the clutch plate.
Between the pressure plate and the flywheel is the clutch plate, and in the center of the clutch plate is a spline that holds a drive shaft, which is the power input shaft of the transmission.
After the driver depresses the clutch pedal, the clutch disengages, and after lifting the clutch pedal, the clutch engages. The clutch disc is a
wear part that needs to be replaced periodically, and as the vehicle's mileage increases, the clutch plate will continue to wear out. When the clutch plate is worn to a
the clutch plate is worn to a certain degree, it will need to be replaced. If the clutch plate is not replaced for a long period of time, the clutch plate will slip.