How to fix a clutch master cylinder oil leak


Release time:

2024-03-25

Determine the extent of the oil leak. If the clutch master cylinder is seeping oil slightly, it may not need to be repaired for a while. However, if the oil seepage is severe, it is recommended to replace the torsion damper.

How to fix a clutch master cylinder oil leak

Solving a clutch master cylinder oil leak usually requires the following steps:

Determine the extent of the oil leak. If the clutch master cylinder is seeping oil slightly, it may not need to be repaired for a while. However, if the oil seepage is severe, it is recommended to replace the torsion damper.
Inspect the components involved. If the oil leak is caused by a damaged oil seal, the seal needs to be replaced. Also, check the hydraulic lines for leaks, as well as the leather bowl and piston of the clutch master cylinder for damage.
Replace the assembly. If the piston and leather bowl of the leather ring inside the clutch sub-pump are worn out and causing it to not seal the clutch oil, the clutch master cylinder may need to be replaced.
Repair method. Remove the locking clip, push rod retaining pin and push rod, disconnect the hose clamp and master cylinder hose, remove the clutch master cylinder nut, and then remove the clutch master cylinder.
Preventive measures. Change the special oil regularly to prevent damage to internal parts. If the oil hose is broken or ruptured, it can be temporarily repaired by sleeving it with rubber or plastic tubing, or by binding it tightly with wire and applying a substance such as soap.
When performing these steps, it is recommended that they be done by a professional mechanic to ensure safe and proper repairs. If you are not familiar with auto repair, it is best to have the repair done at a professional auto repair store.